A struct containing the properties of a channel. More...

#include <TeamTalk.h>

Public Attributes
INT32	nParentID
	Parent channel ID. 0 means no parent channel, i.e. it's the root channel.

INT32	nChannelID
	The channel's ID. A value from 1 - TT_CHANNELID_MAX.

TTCHAR	szName [TT_STRLEN]
	Name of the channel.

TTCHAR	szTopic [TT_STRLEN]
	Topic of the channel.

TTCHAR	szPassword [TT_STRLEN]
	Password to join the channel. When extracted through TT_GetChannel the password will only be set for users of user-type USERTYPE_ADMIN.

TTBOOL	bPassword
	Whether password is required to join channel. Read-only property.

ChannelTypes	uChannelType
	A bitmask of the type of channel based on ChannelType.

INT32	nUserData
	User specific data which will be stored on persistent storage on the server if the channel type is CHANNEL_PERMANENT.

INT64	nDiskQuota
	Number of bytes available for file storage.

TTCHAR	szOpPassword [TT_STRLEN]
	Password to become channel operator.

INT32	nMaxUsers
	Max number of users in channel.

AudioCodec	audiocodec
	The audio codec used by users in the channel.

AudioConfig	audiocfg
	The audio configuration which users who join the channel should use.

INT32	transmitUsers [TT_TRANSMITUSERS_MAX][2]
	List of users who can transmit in a channel.

INT32	transmitUsersQueue [TT_TRANSMITQUEUE_MAX]
	The users currently queued for voice or media file transmission.

INT32	nTransmitUsersQueueDelayMSec
	Delay for switching to next active voice user in `transmitUsersQueue`.

INT32	nTimeOutTimerVoiceMSec
	Time out timer for voice stream. The maximum time in miliseconds a user can transmit voice without changing stream ID.

INT32	nTimeOutTimerMediaFileMSec
	Time out timer for media file stream. The maximum time in miliseconds a user can transmit a media file.

Detailed Description

A struct containing the properties of a channel.

To change the properties of a channel call TT_DoUpdateChannel(). Note that audiocodec cannot be changed if the channel has users.

See also: TT_GetChannel; ChannelType; AudioCodec

Definition at line 2486 of file TeamTalk.h.

Member Data Documentation

◆ nParentID

INT32 Channel::nParentID

Parent channel ID. 0 means no parent channel, i.e. it's the root channel.

Definition at line 2490 of file TeamTalk.h.

◆ nChannelID

INT32 Channel::nChannelID

The channel's ID. A value from 1 - TT_CHANNELID_MAX.

Definition at line 2492 of file TeamTalk.h.

◆ szName

TTCHAR Channel::szName[TT_STRLEN]

Name of the channel.

Definition at line 2494 of file TeamTalk.h.

◆ szTopic

TTCHAR Channel::szTopic[TT_STRLEN]

Topic of the channel.

Definition at line 2496 of file TeamTalk.h.

◆ szPassword

TTCHAR Channel::szPassword[TT_STRLEN]

Password to join the channel. When extracted through TT_GetChannel the password will only be set for users of user-type USERTYPE_ADMIN.

Definition at line 2500 of file TeamTalk.h.

◆ bPassword

TTBOOL Channel::bPassword

Whether password is required to join channel. Read-only property.

Definition at line 2503 of file TeamTalk.h.

◆ uChannelType

ChannelTypes Channel::uChannelType

A bitmask of the type of channel based on ChannelType.

Definition at line 2505 of file TeamTalk.h.

◆ nUserData

INT32 Channel::nUserData

User specific data which will be stored on persistent storage on the server if the channel type is CHANNEL_PERMANENT.

Definition at line 2509 of file TeamTalk.h.

◆ nDiskQuota

INT64 Channel::nDiskQuota

Number of bytes available for file storage.

Definition at line 2511 of file TeamTalk.h.

◆ szOpPassword

TTCHAR Channel::szOpPassword[TT_STRLEN]

Password to become channel operator.

See also: TT_DoChannelOpEx()

Definition at line 2514 of file TeamTalk.h.

◆ nMaxUsers

INT32 Channel::nMaxUsers

Max number of users in channel.

Definition at line 2516 of file TeamTalk.h.

◆ audiocodec

AudioCodec Channel::audiocodec

The audio codec used by users in the channel.

Definition at line 2518 of file TeamTalk.h.

◆ audiocfg

AudioConfig Channel::audiocfg

The audio configuration which users who join the channel should use.

See also: TT_SetSoundInputPreprocess()

Definition at line 2521 of file TeamTalk.h.

◆ transmitUsers

INT32 Channel::transmitUsers[TT_TRANSMITUSERS_MAX][2]

List of users who can transmit in a channel.

transmitUsers is a 2-dimensional array which specifies who can transmit to the channel.

If uChannelType is set to CHANNEL_CLASSROOM then only the users in transmitUsers are allowed to transmit.

In TeamTalk v5.4 and onwards adding a user ID to transmitUsers will block the user from transmitting if the ChannelType is not CHANNEL_CLASSROOM. Basically the opposite effect of CHANNEL_CLASSROOM.

To specify user ID 46 can transmit voice to a CHANNEL_CLASSROOM channel is done by assigning the following:

* transmitUsers[0][0] = 46;
* transmitUsers[0][1] = STREAMTYPE_VOICE;
*

To specify user ID 46 can transmit both voice and video capture to a CHANNEL_CLASSROOM channel is done by assigning the following:

* transmitUsers[0][0] = 46;
* transmitUsers[0][1] = STREAMTYPE_VOICE | STREAMTYPE_VIDEOCAPTURE;
*

The transmission list is terminated by assigning user ID 0 to the end of the list, i.e.:

* transmitUsers[0][0] = 0;
* transmitUsers[0][1] = STREAMTYPE_NONE;
*

To allow all users of a CHANNEL_CLASSROOM channel to transmit a specific StreamType is done like this:

* transmitUsers[0][0] = TT_CLASSROOM_FREEFORALL;
* transmitUsers[0][1] = STREAMTYPE_VOICE;
*

Only channel operators are allowed to change the users who are allowed to transmit data to a channel. Call TT_DoUpdateChannel() to update the list of users who are allowed to transmit data to the channel.

See also: TT_IsChannelOperator; TT_DoChannelOp; TT_CLASSROOM_FREEFORALL

Definition at line 2577 of file TeamTalk.h.

◆ transmitUsersQueue

INT32 Channel::transmitUsersQueue[TT_TRANSMITQUEUE_MAX]

The users currently queued for voice or media file transmission.

This property only applied when channel is configured with CHANNEL_SOLO_TRANSMIT. Read-only property.

Definition at line 2582 of file TeamTalk.h.

◆ nTransmitUsersQueueDelayMSec

INT32 Channel::nTransmitUsersQueueDelayMSec

Delay for switching to next active voice user in transmitUsersQueue.

In channels of type CHANNEL_SOLO_TRANSMIT only one user can transmit voice. When user has stopped transmitting this value specifies the delay before switching to next user in transmitUsersQueue. Default value is 500 msec.

Definition at line 2590 of file TeamTalk.h.

◆ nTimeOutTimerVoiceMSec

INT32 Channel::nTimeOutTimerVoiceMSec

Time out timer for voice stream. The maximum time in miliseconds a user can transmit voice without changing stream ID.

See also: STREAMTYPE_VOICE

Definition at line 2594 of file TeamTalk.h.

◆ nTimeOutTimerMediaFileMSec

INT32 Channel::nTimeOutTimerMediaFileMSec

Time out timer for media file stream. The maximum time in miliseconds a user can transmit a media file.

See also: STREAMTYPE_MEDIAFILE_AUDIO

Definition at line 2598 of file TeamTalk.h.

Public Attributes