This section explains how to instantiate a new client instance and query its current state. More...

Classes
class	BearWare.TeamTalkBase
	Abstract class which encapsulates the TeamTalk 5 client. Instantiate either BearWare.TeamTalk5 (TeamTalk 5 SDK Standard Edition) or BearWare.TeamTalk5Pro (TeamTalk 5 SDK Professional Edition) to create the TeamTalk instance. More...

class	BearWare.TeamTalk5
	Class used to load `TeamTalk5.dll` and instantiate a TeamTalk client in TeamTalk 5 SDK Standard Edition. More...

class	BearWare.TeamTalk5Pro
	Class used to load `TeamTalk5Pro.dll` and instantiate a TeamTalk client in TeamTalk 5 SDK Professional Edition. More...

Enumerations
enum class	BearWare.ClientFlag : uint { BearWare.CLIENT_CLOSED = 0x00000000 , BearWare.CLIENT_SNDINPUT_READY = 0x00000001 , BearWare.CLIENT_SNDOUTPUT_READY = 0x00000002 , BearWare.CLIENT_SNDINOUTPUT_DUPLEX = 0x00000004 , BearWare.CLIENT_SNDINPUT_VOICEACTIVATED = 0x00000008 , BearWare.CLIENT_SNDINPUT_VOICEACTIVE = 0x00000010 , BearWare.CLIENT_SNDOUTPUT_MUTE = 0x00000020 , BearWare.CLIENT_SNDOUTPUT_AUTO3DPOSITION = 0x00000040 , BearWare.CLIENT_VIDEOCAPTURE_READY = 0x00000080 , BearWare.CLIENT_TX_VOICE = 0x00000100 , BearWare.CLIENT_TX_VIDEOCAPTURE = 0x00000200 , BearWare.CLIENT_TX_DESKTOP = 0x00000400 , BearWare.CLIENT_DESKTOP_ACTIVE = 0x00000800 , BearWare.CLIENT_MUX_AUDIOFILE = 0x00001000 , BearWare.CLIENT_CONNECTING = 0x00002000 , BearWare.CLIENT_CONNECTED = 0x00004000 , BearWare.CLIENT_CONNECTION = CLIENT_CONNECTING \| CLIENT_CONNECTED , BearWare.CLIENT_AUTHORIZED = 0x00008000 , BearWare.CLIENT_STREAM_AUDIO = 0x00010000 , BearWare.CLIENT_STREAM_VIDEO = 0x00020000 }
	Flags used to describe the the client instance current state. More...

Functions
static string	BearWare.TeamTalkBase.GetVersion ()
	Get the DLL's version number. More...

	BearWare.TeamTalkBase.TeamTalkBase (bool poll_based)
	Create a new TeamTalk client instance. More...

void	BearWare.TeamTalkBase.Dispose ()

bool	BearWare.TeamTalkBase.GetMessage (ref TTMessage pMsg, int nWaitMs)
	Poll for events in the client instance. More...

bool	BearWare.TeamTalkBase.PumpMessage (ClientEvent nClientEvent, int nIdentifier)
	Cause client instance event thread to schedule an update event. More...

BearWare.ClientFlag	BearWare.TeamTalkBase.GetFlags ()
	Get a bitmask describing the client's current state. More...

static bool	BearWare.TeamTalkBase.SetLicenseInformation (string szRegName, string szRegKey)
	Set license information to disable trial mode. More...

void	BearWare.TeamTalkBase.ProcessMsg (TTMessage msg)
	Event handler for BearWare.TTMessage. More...

Variables
const int	BearWare.TeamTalkBase.TT_STRLEN = 512
	The maximum length of all strings used in TeamTalkBase. This value includes the zero terminator, so 511 characters. Note that Unicode characters are converted to UTF-8 internally and limited once again to 512 if the string gets longer. More...

const int	BearWare.TeamTalkBase.TT_USERID_MAX = 0xFFF
	The highest user ID. More...

const int	BearWare.TeamTalkBase.TT_CHANNELID_MAX = 0xFFF
	The highest channel ID. Also used for TT_CLASSROOM_FREEFORALL. More...

const int	BearWare.TeamTalkBase.TT_LOCAL_USERID = 0
	User ID passed to TeamTalkBase.EnableAudioBlockEvent() in order to receive BearWare.AudioBlock directly from sound input device after joining a channel. More...

const int	BearWare.TeamTalkBase.TT_LOCAL_TX_USERID = 0x1002
	User ID passed to TeamTalkBase.EnableAudioBlockEvent() in order to receive BearWare.AudioBlock when voice transmission is activated. More...

const int	BearWare.TeamTalkBase.TT_MUXED_USERID = 0x1001
	User ID used to identify muxed audio that has been mixed into a single stream. More...

Properties
ClientFlag	BearWare.TeamTalkBase.Flags `[get]`
	Same as GetFlags(). More...

Detailed Description

This section explains how to instantiate a new client instance and query its current state.

To instantiate a client in TeamTalk 5 SDK Standard Edition call the constructor TeamTalk5.TeamTalk5() and in TeamTalk 5 Professional Edition call TeamTalk5Pro.TeamTalk5Pro(). In both cases the constructor has the parameter poll_events which should be 'false' for Windows Forms applications and 'true' for console applications. The poll_events parameter tells how the client instance should post its events. Since a Windows Forms application has its own message-loop it does not need to "poll" for events. This is, however, needed by console applications which should call TeamTalkBase.GetMessage() to get events.

When a new client instance is created a user application can call to TeamTalkBase.GetFlags() to query the client instance's current state. Initially the client instance's state will be ClientFlag ClientFlag.CLIENT_CLOSED. This means that no operation has been performed on the client.

Enumeration Type Documentation

◆ ClientFlag

enum BearWare.ClientFlag : uint

strong

Flags used to describe the the client instance current state.

The client's state is a bitmask of the flags in ClientFlag.

The state of the client instance can be retrieved by calling TeamTalkBase.GetFlags() This enables the user application to display the possible options to the end user. If e.g. the flag ClientFlag.CLIENT_AUTHORIZED is not set it will not be possible to perform any other commands except TeamTalkBase.DoLogin(). Doing so will make the server return an error message to the client.

Enumerator
CLIENT_CLOSED	The client instance is in closed state, i.e. no operations has been performed on it.
CLIENT_SNDINPUT_READY	If set the client instance's sound input device has been initialized, i.e. TeamTalkBase.InitSoundInputDevice() has been called successfully.
CLIENT_SNDOUTPUT_READY	If set the client instance's sound output device has been initialized, i.e. TeamTalkBase.InitSoundOutputDevice() has been called successfully.
CLIENT_SNDINOUTPUT_DUPLEX	If set the client instance is running in sound duplex mode where multiple audio output streams are mixed into a single stream. This option must be enabled to support echo cancellation (see BearWare.SpeexDSP). Call TeamTalkBase.InitSoundDuplexDevices() to enable duplex mode.
CLIENT_SNDINPUT_VOICEACTIVATED	If set the client instance will start transmitting audio if the sound level is above the voice activation level. The event ClientEvent.CLIENTEVENT_VOICE_ACTIVATION is posted when voice activation initiates transmission. See also TeamTalkBase.SetVoiceActivationLevel() TeamTalkBase.EnableVoiceActivation()
CLIENT_SNDINPUT_VOICEACTIVE	If set GetSoundInputLevel() is higher than the voice activation level. To enable voice transmission if voice level is higher than actication level also enable ClientFlag.CLIENT_SNDINPUT_VOICEACTIVATED. See also TeamTalkBase.SetVoiceActivationLevel() TeamTalkBase.EnableVoiceActivation()
CLIENT_SNDOUTPUT_MUTE	If set the client instance has muted all users. See also TeamTalkBase.SetSoundOutputMute()
CLIENT_SNDOUTPUT_AUTO3DPOSITION	If set the client instance will auto position users in a 180 degree circle using 3D-sound. This option is only available with SoundSystem.SOUNDSYSTEM_DSOUND. See also TeamTalkBase.SetUserPosition() TeamTalkBase.Enable3DSoundPositioning()
CLIENT_VIDEOCAPTURE_READY	If set the client instance's video device has been initialized, i.e. TeamTalkBase.InitVideoCaptureDevice() has been called successfuly.
CLIENT_TX_VOICE	If set the client instance is currently transmitting audio. See also TeamTalkBase.EnableVoiceTransmission()
CLIENT_TX_VIDEOCAPTURE	If set the client instance is currently transmitting video. See also TeamTalkBase.StartVideoCaptureTransmission()
CLIENT_TX_DESKTOP	If set the client instance is currently transmitting a desktop window. A desktop window update is issued by calling TeamTalkBase.SendDesktopWindow(). The event ClientEvent.CLIENTEVENT_DESKTOPWINDOW_TRANSFER is triggered when a desktop window transmission completes.
CLIENT_DESKTOP_ACTIVE	If set the client instance current have an active desktop session, i.e. TeamTalkBase.SendDesktopWindow() has been called. Call TeamTalkBase.CloseDesktopWindow() to close the desktop session.
CLIENT_MUX_AUDIOFILE	If set the client instance is currently muxing audio streams into a single file. This is enabled by calling TeamTalkBase.StartRecordingMuxedAudioFile().
CLIENT_CONNECTING	If set the client instance is currently try to connect to a server, i.e. TeamTalkBase.Connect() has been called.
CLIENT_CONNECTED	If set the client instance is connected to a server, i.e. ClientEvent.CLIENTEVENT_CON_SUCCESS event has been issued after doing a TeamTalkBase.Connect(). Valid commands in this state: TeamTalkBase.DoLogin()
CLIENT_CONNECTION	Helper for ClientFlag.CLIENT_CONNECTING and ClientFlag.CLIENT_CONNECTED to see if TeamTalkBase.Disconnect() should be called.
CLIENT_AUTHORIZED	If set the client instance is logged on to a server, i.e. got ClientEvent.CLIENTEVENT_CMD_MYSELF_LOGGEDIN event after issueing TeamTalkBase.DoLogin().
CLIENT_STREAM_AUDIO	If set the client is currently streaming the audio of a media file. When streaming a video file the ClientFlag.CLIENT_STREAM_VIDEO flag is also typically set. See also TeamTalkBase.StartStreamingMediaFileToChannel()
CLIENT_STREAM_VIDEO	If set the client is currently streaming the video of a media file. When streaming a video file the ClientFlag.CLIENT_STREAM_AUDIO flag is also typically set. See also TeamTalkBase.StartStreamingMediaFileToChannel()

Definition at line 4077 of file TeamTalk.cs.

Function Documentation

◆ GetVersion()

static string BearWare.TeamTalkBase.GetVersion ( )

static

Get the DLL's version number.

Definition at line 4304 of file TeamTalk.cs.

◆ TeamTalkBase()

BearWare.TeamTalkBase.TeamTalkBase ( bool poll_based )

protected

Create a new TeamTalk client instance.

Parameters

poll_based If the application using this class is a Windows Forms application poll_based should be 'false' since events will be posted using the Windows message loop. In Console applications on the other hand, the user application will have to 'poll' for events using GetMessage(). Remember to put the [STAThread] macro on the Main method if building a console application.

Definition at line 4316 of file TeamTalk.cs.

◆ Dispose()

void BearWare.TeamTalkBase.Dispose ( )

Definition at line 4399 of file TeamTalk.cs.

◆ GetMessage()

bool BearWare.TeamTalkBase.GetMessage	(	ref TTMessage	pMsg,
		int	nWaitMs
	)

Poll for events in the client instance.

In a Windows Forms application events can be processed using the application message-loop, but in Console application the application must process the events itself. The most common way to do this is to start a timer which calls TeamTalkBase.GetMessage() every now and then to ensure the UI is updated with the latest events.

Parameters

pMsg	Reference to a TTMessage instance which will hold the event that has occured.
nWaitMs	The amount of time to wait for the event. If -1 the function will block forever or until the next event occurs.

Returns: Returns TRUE if an event has occured otherwise FALSE.

See also: TeamTalk(); ClientEvent

Definition at line 4432 of file TeamTalk.cs.

◆ PumpMessage()

bool BearWare.TeamTalkBase.PumpMessage	(	ClientEvent	nClientEvent,
		int	nIdentifier
	)

Cause client instance event thread to schedule an update event.

Normally all events are due to a state change in the client instance. The state change (ClientEvent) is submitted by the client instance's internal thread. In some cases it's, however, convenient to make the internal thread submit the latest properties of an object. One example is after having changed the volume of a BearWare.User. Then your local copy of BearWare.User will no longer contain the latest nVolumeVoice.

Calling PumpMessage() will make the client instance's internal thread queue an update of BearWare.User so the latest properties of the user can be retrieved from GetMessage().

It's also possible to simply use GetUser() but the problem with this approach is that this call is from a separate thread and therefore doesn't take the event queue into account.

Parameters

nClientEvent	The event which should be queued. Currently only ClientEvent.CLIENTEVENT_USER_STATECHANGE is supported.
nIdentifier	The ID of the object to retrieve. Currently only nUserID is supported.

Returns: Returns true if the event has been scheduled.

Definition at line 4463 of file TeamTalk.cs.

◆ GetFlags()

BearWare.ClientFlag BearWare.TeamTalkBase.GetFlags ( )

Get a bitmask describing the client's current state.

Checks whether the client is connecting, connected, authorized, etc. The current state can be checked by and'ing the returned bitmask which is based on ClientFlag.

Returns: A bitmask describing the current state.

Definition at line 4477 of file TeamTalk.cs.

◆ SetLicenseInformation()

static bool BearWare.TeamTalkBase.SetLicenseInformation	(	string	szRegName,
		string	szRegKey
	)

static

Set license information to disable trial mode.

This function must be called before instantiating either the BearWare.TeamTalk5 or BearWare.TeamTalk5Pro-class.

Parameters

szRegName	The registration name provided by BearWare.dk.
szRegKey	The registration key provided by BearWare.dk.

Returns: True if the provided registration is acceptable.

Definition at line 4499 of file TeamTalk.cs.

◆ ProcessMsg()

void BearWare.TeamTalkBase.ProcessMsg ( TTMessage msg )

Event handler for BearWare.TTMessage.

Parameters

msg	The BearWare.TTMessage retrieved by TeamTalkBase.GetMessage()

Definition at line 4508 of file TeamTalk.cs.

Variable Documentation

◆ TT_STRLEN

const int BearWare.TeamTalkBase.TT_STRLEN = 512

static

The maximum length of all strings used in TeamTalkBase. This value includes the zero terminator, so 511 characters. Note that Unicode characters are converted to UTF-8 internally and limited once again to 512 if the string gets longer.

Definition at line 4188 of file TeamTalk.cs.

◆ TT_USERID_MAX

const int BearWare.TeamTalkBase.TT_USERID_MAX = 0xFFF

static

The highest user ID.

Definition at line 4191 of file TeamTalk.cs.

◆ TT_CHANNELID_MAX

const int BearWare.TeamTalkBase.TT_CHANNELID_MAX = 0xFFF

static

The highest channel ID. Also used for TT_CLASSROOM_FREEFORALL.

Definition at line 4195 of file TeamTalk.cs.

◆ TT_LOCAL_USERID

const int BearWare.TeamTalkBase.TT_LOCAL_USERID = 0

static

User ID passed to TeamTalkBase.EnableAudioBlockEvent() in order to receive BearWare.AudioBlock directly from sound input device after joining a channel.

When this user ID is passed then the BearWare.AudioBlock received will be prior to audio preprocessing (BearWare.AudioPreprocessor).

Note, however, that ClientEvent.CLIENTEVENT_USER_AUDIOBLOCK will not be triggered until the TeamTalk instance is in a channel. This is because the sound input device is not started until it knows the BearWare.AudioCodec's sample rate, number of channels and transmit interval.

Definition at line 4251 of file TeamTalk.cs.

◆ TT_LOCAL_TX_USERID

const int BearWare.TeamTalkBase.TT_LOCAL_TX_USERID = 0x1002

static

User ID passed to TeamTalkBase.EnableAudioBlockEvent() in order to receive BearWare.AudioBlock when voice transmission is activated.

Either through TeamTalkBase.EnableVoiceActivation() or TeamTalkBase.EnableVoiceTransmission().

Definition at line 4260 of file TeamTalk.cs.

◆ TT_MUXED_USERID

const int BearWare.TeamTalkBase.TT_MUXED_USERID = 0x1001

static

User ID used to identify muxed audio that has been mixed into a single stream.

This user ID is passed to TeamTalkBase.EnableAudioBlockEvent() in order to receive BearWare.AudioBlock of audio that is played in the TeamTalk instance.

Definition at line 4269 of file TeamTalk.cs.

Properties

◆ Flags

ClientFlag BearWare.TeamTalkBase.Flags

get

Same as GetFlags().

Definition at line 4485 of file TeamTalk.cs.

Classes

Enumerations

Functions

Variables

Properties

Detailed Description

Enumeration Type Documentation

◆ ClientFlag

Function Documentation

◆ GetVersion()

◆ TeamTalkBase()

◆ Dispose()

◆ GetMessage()

◆ PumpMessage()

◆ GetFlags()

◆ SetLicenseInformation()

◆ ProcessMsg()

Variable Documentation

◆ TT_STRLEN

◆ TT_USERID_MAX

◆ TT_CHANNELID_MAX

◆ TT_LOCAL_USERID

◆ TT_LOCAL_TX_USERID

◆ TT_MUXED_USERID

Properties

◆ Flags